Parker AC10 IP66 2.2kW 230V 1ph to 3ph AC Inverter Drive, DBr, C3 EMC

16G-11-0100-BF

Order Code: 26803
Available to Order
Delivery normally 6 weeks

List Price: £731.33

£424.17
(excl. VAT)
£509.00
(inc. VAT )
Price break
per unit
1+
£424.17
5+
£405.89
10+
£387.60

Condition: New with Warranty
Brand: Parker, Range: AC10

Parker AC10 series AC Inverter for 2.2kW (3HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 10A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor. Rated to IP66 for use in dusty indoor environments.

Size 1: 200mm Wide x 198mm Deep x 412mm High. IP66.

Overload: 150% x 60 seconds
Speed Control Range: 0.5-590Hz
Braking: Minimum 60 Ohm external resistor (not supplied) - use the 'Which Resistor' button on this page.

Integrated Keypad, 2 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 1 Digital Output, 2 Relay Contact sets, Terminals for Modbus RS485 Communications.
Input Current: 21A
Input Voltage: 220-240V Single Phase ±15% at 50-60Hz
EMC Filters: IEC EN 61800-3 (2004)(+A1:2012) Category C3 (Industrial).

Wall mount.
Rated 40°C Ambient.
Heat Loss at max output: [not specified]
Mounting via holes at rear for M5 screws on 171mm x 398mm centres.

Manufacturer part number is 16G-11-0100-BF.

Download the Parker SSD AC10 IP66 Manual from the link below:-

You may also be interested in...

£34.00
£30.60
£29.92
1+
12+
24+