SSD 650S AC Frequency Inverter for 7.5kW (10HP) 400V 3 Ph Permanent magnet rotor synchronous motor in Sensorless Vector control to 16A. With Keypad. Simple set-up and ready to run from its default settings.
96mm Wide x 195mm Deep x 257mm High.
Overload - 150% x 30seconds.
Speed Control Range - 0/240Hz.
Braking - 40% duty into minimum 56 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 x Analogue Inputs, 3/4 Digital Inputs, 1 Analogue output, 1/2 Digital outputs (one relay and one programmable in/out).
Input Current - 23.6A.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
EMC Filters: None
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 180W.
Mounting onto symmetrical DIN rail or use the detachable clip for screw fixing.
Full part number is - 650S-43216030-B01P00-A1
Use this drive with the new high efficiency Permanent magnet rotor synchronous motors for Energy Saving applications.
Download the manuals from the link below...