SSD Drives 590P Series - 1580A Four Quadrant DC Thyristor Drive for 220-500V 3ph Supply with 115V Control circuit. Includes Separate Airflow Kit LA466717U002
Typical Motor output - up to 650kW (900HP) at 500V DC, for fully regenerative DC motor speed and torque control.
Two Input Chokes are required with this drive - please see link below
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Size 5: 506mm Wide x 358mm Deep x 700mm High (excludes the separate airflow kit).
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Output Current: 1580A with 150% overload x 30 seconds or 200% x 10 seconds.
Continuous output Current: 1740A without overload.
Input Current - 1295A or 1479A for Armature + up to 30A for Field.
Input Voltage - 220-500V ac ±10%, 50/60Hz ± 5%.
Control supply at 115V is required for: electronics, pilot for the main contactors (2off required) and 2off 130W cooling fans at 115V.
Rated at 40C Ambient.
Heat Loss at max output - 4890W.
Fault current is 85kA
Weight is 90kg
Full part number is - 590P-53415851-A00-U4A0
Requires 2 x 1000A high speed line fuses in each phase .
(Thyristor I*t = 1,125KA²s
View alternatives - search for 1580A DC.
Download the 590P full Manual from the link below...