Parker SSD Drives 590P Series, 270A Four Quadrant DC Thyristor Drive for 400V Supply with 230V Control supply. Converts a three phase AC supply to DC, for speed and torque control of a DC motor.
Typical Motor output, up to 112kW (150HP) at 460V DC for fully regenerative DC motor speed and torque control.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Internal Armature Voltage Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current: 222A for Armature + up to 10A for Field.
Input Voltage: 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Ambient Temperature: Rated at 40C.
Ventilation space above 150mm, Ventilation space below 100mm, Ventilation space at sides 0mm (bars are left side).
Heat Loss: 840W at maximum output.
Dimensions: 300mm wide x 500mm high x 210mm deep.
Mounting: Panel mount with M6 screw fixings on 400 x 200mm centres.
Part Number: 590P-53327032-P00-U4V0 Was: 590P-0270-500-0011-UK-ARM-0-230-0, Exactly the same as Eurotherm Drives 590P-0270-500-0011-UK-ARM-0-230-0. Can be specified as 590P-0270-500-0010-FR-ARM-0-230-0 if required.
Replaces:- SSD and Eurotherm Drives 590C-0270 digital (590C/2700/5/3/0/0/00/000), 590A-0270 and 547-3000 analogue products. Requires external back-up high speed fuses.
Download the 590P Manual from the link below...