SSD Drives 590P Series - 165A Single or Two Quadrant DC Thyristor Drive for 400V Supply with 110V or 230V Control supply (universal).
Typical Motor output - up to 68kW (90HP) at 460V DC for motor speed and torque control.
Keypad and analogue Tacho-generator feedback board are included.
Simple to set-up in Digital, fully-isolated Single or Two Quadrant form and ready to run from its 'Quick Set-Up' settings.
Size 2 - 200mm Wide x 292mm Deep x 434mm High.
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current - 136A for Armature + up to 10A for Field.
Input Voltage - 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Input fuse - 200A or lower to suit input bridge at 19,100A²s
Use a choke in the supply at 50uH minimum.
Rated at 40C Ambient.
Ventilation space above - 160mm.
Ventilation space below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 519W.
Panel mount with M6 screw fixings on 418 x 140mm centres.
Full part number is - 591P-53316520-P00-U4A0. Was 591P-0165-500-0011-UK-AN-0-0-000, Exactly the same as Eurotherm Drives 591P-0165-500-0011-UK-AN-0-0-000.
The default language used for the display is English. French is also included as an optional second language. The second language can be changed to German, Italian or Spanish via a PC if required. Please contact us for instructions.
Replaces:- SSD and Eurotherm Drives 591A-1500, 546-1500 analogue products. Used on many Extruder and general applications.
Download the 591P Technical product Manual from the link below...