SSD Drives 590P Series DC Motor Speed Controllers - Static Reversing Four Quadrant External Thyristor Stack Driver for 220V to 500V Supply with 110V or 230V Control supply (universal).
Provides trigger pulses for an existing or separate Armature Thyristor stack.
Keypad and Armature Voltage Feedback.
Simple to set-up in Digital, fully-isolated Four Quadrant form and ready to run from its 'Quick Set-Up' settings.
Size 1 - 250mm Wide x 180mm Deep x 415mm High.
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Internal Armature Voltage Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current - up to 50A for a 60A Field (120A field available on request).
Input Voltage - 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Rated at 40C Ambient.
Ventilation space above - 160mm.
Ventilation space below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - xxxW.
Panel mount with M6 screw fixings on 200 x 400mm centres.
Full part number is - 598P-53260010-TP00-U4V0 Was - 598P-0060-500-00T0-UK-ARM-0-0-0, Exactly the same as Eurotherm Drives 598P-0060-500-00T0-UK-ARM-0-0-0.
Replaces:- SSD and Eurotherm Drives 598A-xxxx and 598C-xxxx products. Used on many Extruder and general applications. Requires external back-up high speed fuses.
Download the 598P and 599P Technical product Manual from the link below...