Parker SSD 890 Series High Performance AC Frequency Inverter for 2.2kW (3HP) 400V 3 Ph motor to 6A. Operates in Servo Drive Control with Incremental Encoder Feedback and Profibus communications.
Size B - 72.4mm Wide x 258.5mm Deep x 433.6mm High. IP20
Weight: 5kg.
Overload - 150% x 60 seconds
Braking - To 100 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Safe Torque Off to SIL3 or PLe level as per EN ISO13849 and EN61800-5-2.
4 Analogue Inputs, 7 Digital Inputs, 2 Analogue Outputs, 2 Digital Inputs/Outputs, 1 Relay Contact Set, USB port for Programming.
Resolver feedback card with Repeater Output fitted for use with Parvex EX ATEX motor.
Input Current - 9.0A.
Input Voltage - 380 - 500Vac ±10% at 50/60Hz
EMC Filters to EN61800-3 to the 2nd Environment (Industrial). See linked products below for external 1st Environment (Domestic) EMC Filter.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front - [Not Specified]
Ventilation space above and below - 150mm.
Ventilation space at sides - 0mm (drives can be mounted side by side).
Mounting via 2 x holes at rear (1 top, 1 bottom) on 413.6mm centres.
Mounting onto 35mm DIN rail using included fitting kit.
Part number is - 890SD-531600B0-B00-1A3P0. Part number breaks down as...[890SD-] : AC890 Standalone Drive Module
[53] : 400/500VAC 3-phase input
[1600B] : 2.20kW / 6.00A Constant Torque Rating (4.00A Servo Mode) - Frame 'B'
[0-] : No Auxiliary Supply Option
[B] : Brake Switch Fitted
[00-] : No Special Option
[1] : Advanced Performance
[A] : English (50Hz) Destination
[3] : Incremental Quadrature Encoder Feedback
[P] : Profibus Communications Option (Technology Slot ''A'')
[0] : No Option Fitted (Technology Slot ''B'')
Download the Parker 890SD Manual and Programming Guide from the links below:-