SSD 690+ AC Frequency Inverter for 2.2kW (3HP) 230V 3Ph motors in VxF control, Sensorless Flux Vector control or Full Closed Loop Flux Vector (when the optional encoder board is fitted) to 10.5A. Simple set-up and ready to run in VxF from its default settings, includes ports to remote mount its Keypad.
177mm Wide x 181mm Deep x 233mm High.
Overload - 150% x 60 seconds.
Speed Control Range - 0/120Hz (default), 0/240Hz & 0/480Hz.
Braking - 100% duty into minimum 56 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
EMC Filter included (Industrial)
4 x Analogue Inputs, 8 Digital Inputs, 3 Analogue outputs, 3 Digital outputs (relay contacts).
Input Current - 13A.
Input Voltage - 220V/230V three phase +-10% at 50/60Hz.
Input fuse - 16A to suit input bridge at 425A²s
Cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 80mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 150W.
Mounting - 4 x M4 screw fixing.
Full part number is -690-232105B0-BF0P00-A400 - Was 690PB-0022-230-3-F-0011-UK-0-0-0-0-0 - Exactly the same as SSD Drives and Eurotherm Drives - 690PB-0022-230-3-F-0011-UK-0-0-0-0-0.
The menu uses simple to understand English-language terms. The default is English, but can be changed to German, French, Spanish, Italian, Polish, Swedish and Portuguese, by going to 'System', then 'Languages' and selecting the language required.
Replaces:- 605/022/230/3/F/0011/UK/000
Download the 690P Manuals from the links below...