Parker AC10 series AC Inverter for 2.2kW (3HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 10A. Converts fixed frequency three phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor.
Size 2: 106mm Wide x 150mm Deep x 180mm High (excluding 15mm earth clamp). IP20.
Weight: 1.76kg.
Overload: 150% x 60 seconds
Speed Control Range: 0.5-590Hz
Braking (DBr): 100% Duty to Minimum 50 Ohm, Maximum 56 Ohm external resistor (not supplied) - See the Linked products below or use the 'Which Resistor' button on this page.
Integrated Keypad, 2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 1 Digital Output, 1 Relay Contact set, Terminals for Modbus RS485 Communications.
RJ11 port for commissioning using free DSELite PC software (download via link below). Parameter clone port.
Note: For 22kW and below, build standards earlier than 1.02 have 5 Digital Inputs, 1 Analogue Output and RS485 terminals on the front instead of on the side of the unit.
Input Current: 11A
Input Voltage: 220-240V Three Phase ±15% at 50-60Hz
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial).
Cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified], above and below: 150mm, at sides: 50mm.
Heat Loss at max output: [not specified]
Mounting via holes at rear for M4 screws on 94mm x 170mm centres.
Manufacturer part number is 10G-32-0100-BF.
Download the Parker SSD AC10 Manual and Quick Start Guide from the links below:-