Parker SSD 650 Series AC Inverter for 0.37kW (0.55HP) 230V 3 Ph motor in VxF control to 2.2A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V for a standard AC Induction motor.
From September 2015 the Parker SSD 650 Series is no longer available. The manufacturer recommends that customers migrate to an AC10 of equivalent rating.
Size 1: 73mm Wide x 142mm Deep x 143mm High. IP20
Weight: 0.85kg.
Overload: 150% x 30 seconds
Speed Control Range: 0-240Hz
Braking: None.
Includes operator keypad (remote mounting option).
2 Analogue Inputs, 4 Digital Inputs (2 configurable as Digital Outputs), 1 Analogue Output, 1 Relay Contact set, Motor Thermistor terminals, RJ11 port for RS232 communications.
Input Current: 6.2A
Input Voltage: 220-240V Single Phase ±10% at 50-60Hz ±10%
EMC Filters: IEC 61800-3 First Environment (Domestic).
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: (not specified).
Ventilation space above and below: 100mm.
Ventilation space at sides: 0mm.
Heat Loss at max output: 32W.
Mounting via 35mm DIN rail or 2 x holes for M4 bolts at rear on 132mm centres.
Manufacturer part number is 650-21122010-0F1P00-A2. Legacy part number was 650/003/230/F/00/DISPR/UK/RS0/0. Exactly the same as part number 650/003/230/F/01/DISPR/UK/RS0/0 in all but livery.
This product has been sold under many other names including; Eurotherm Drives, SSD, KIMO, RS Components, Baldor and Newlec.
Download the Parker SSD 650 Quick Start Guide and Manual from the links below:-