Parker SSD Drives 650G Series AC Inverter for 4kW (5.5HP) 230V three phase motor in VxF and Sensorless Vector control to 16.4A. Converts fixed frequency three phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Size 3: 96mm Wide x 200mm Deep x 260mm High. IP20.
Weight: 2.7kg.
Overload: 150% x 30 seconds
Speed Control Range: 0-240Hz
Braking: 100% duty to minimum 28 Ohm, maximum 40 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
No Keypad (dust cover only), RS232 Port, 2 Analogue Inputs, 3/4 Digital Inputs, 1 Analogue Output, 10 Volt ref, 2 Programmable Digital Input/Outputs, 1 Relay Contact set, 1 motor thermistor input.
Input Current: 23.1A
Input Voltage: 220-240V Three Phase ±10% at 50-60Hz ±10%
EMC Compliance: No integrated EMC filters.
Cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [unspecified], above and below: 100mm, at sides: [unspecified].
Heat Loss at max output: 180W
Mounting via 35mm DIN rail or via 2 x M5 screws at rear on 242mm centres.
Manufacturer part number is 650G-23216430-B01P00-A0.
Download the Parker SSD 650G Manual, Quick Start Guide and Software Manual from the links below:-