Parker SSD 650 Series AC Inverter for 2.2kW (3.0HP) 230V 3 Ph motor in VxF control to 9.6A. Converts fixed frequency single phase 230V input (or three phase 230V) to variable frequency three phase 230V for a standard AC Induction motor.
Size 3: 96mm Wide x 200mm Deep x 260mm High. IP20
Weight: 2.7kg.
Overload: 150% x 30 seconds
Speed Control Range: 0-240Hz
Braking: 100% duty into minimum 56 Ohm external resistor.
No operator keypad included.
2 Analogue Inputs, 4 Digital Inputs (2 configurable as Digital Outputs), 1 Analogue Output, 1 Relay Contact set, Motor Thermistor terminals, RJ11 port for RS232 communications.
Single Input Current: 22.0A - Three Input Current: 14.3A
Input Voltage: 220-240V Single or Three Phase ±10% at 50-60Hz ±10%
EMC Filters: None
Cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 0mm.
Heat Loss at max output: 112W.
Mounting via 35mm DIN rail or 2 x holes for M5 bolts at rear on 242mm centres.
Manufacturer part number is 650-22196030-B01P00-A0. Legacy part number was 650/022/230/0/00/0/UK/RS0/0. Exactly the same as part number 650/022/230/0/01/0/UK/RS0/0 in all but livery.
This product has been sold under many other names including; Eurotherm Drives, SSD, KIMO, RS Components, Baldor and Newlec.
Can be used as a direct replacement for part number 650-22196030-B00P00-A0, Legacy part number 650/022/230/0/00/0/UK/0/0.
Download the Parker SSD 650 Quick Start Guide and Manual from the links below:-