SSD 690+ AC Frequency Inverter 0.75kW (1HP) to 4.0A for 230V 3 Ph motors in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control, fitted with 'System Board' for Master and Slave Encoder inputs. Use this drive for 0.55kW (0.75HP) and 0.37kW (0.5HP) motors also.
Size B - 177mm Wide x 181mm Deep x 233mm High.
Overload - 150% x 60 seconds.
Software function blocks included for electronic gearing between drives.
Speed Control Range - 1000:1 turndown over 0/120Hz (default), 0/240Hz or 0/480Hz with suitable motor mounted encoder.
Braking - 100% duty into minimum 56 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
4 x Analogue Inputs (one at +-12Bit), 8 Digital Inputs, 3 Analogue outputs, 3 Digital outputs (relay contacts), 5 x Programmable Digital Inputs/Outputs, 2 x Encoder inputs (15V full quadrature with complements) and repeat buffered encoder output.
Input Current - 11A.
Input Voltage - 220/240V three phase +-10% at 50/60Hz.
Input fuse - 12A to suit input bridge at 425A²s
Cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 80mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 80W.
Mounting - M4 screw fixings on 129.5mm x 223mm centres.
New part number is - 690-211400B0-BFSP00-A400, was 690PB-0007-230-1-F-0011-UK-0-0-0-SHTTL-0 - Exactly the same as SSD Drives and Eurotherm Drives - 690PB-0007-230-1-F-0011-UK-0-0-0-SHTTL-0.
The menu uses simple to understand English-language terms to describe its selection and functions. The default is English, but can be changed to German, French, Spanish, Italian, Polish, Swedish and Portuguese, by going to 'System', then 'Languages' and selecting the language required.