Parker SSD Drives 650G Series AC Inverter for 2.2kW (3HP) 400V three phase motor in VxF and Sensorless Vector control to 5.5A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size 2: 73mm Wide x 173mm Deep x 201mm High. IP20.
Weight: 1.4kg.
Overload: 150% x 30 seconds
Speed Control Range: 0-240Hz
Braking: 100% duty to minimum 200 Ohm, maximum 260 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Remote Mountable Keypad, RS232 Port, 2 Analogue Inputs, 3/4 Digital Inputs, 1 Analogue Output, 10 Volt ref, 2 Programmable Digital Input/Outputs, 1 Relay Contact set, 1 motor thermistor input.
Input Current: 9.4A
Input Voltage: 380-460V Three Phase ±10% at 50-60Hz ±10%
EMC Compliance: IEC EN 61800-3 Category C2 (Industrial and restricted Domestic).
Cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [unspecified], above and below: 100mm, at sides: [unspecified].
Heat Loss at max output: 70W
Mounting via 35mm DIN rail or via 2 x M5 screws at rear on 188mm centres.
Manufacturer part number is 650G-43155020-BF1P00-A2.
Download the Parker SSD 650G Manual, Quick Start Guide and Software Manual from the links below:-