SSD 650V AC Frequency Inverter for 30W (40HP) 400V 3 Ph motor to 59A at high overload or 37kW (50HP) to 73A when Fan/Pump rated, operates in VxF or Sensorless Flux Vector control. Simple set-up and ready to run in VxF from its default settings.
Includes Conformally Coated Boards.
Size D - 252mm Wide x 245mm Deep x 453mm High.
Overload - 150% x 30seconds and 180% for 0.5seconds.
Speed Control Range - 0/240Hz.
Braking - 35% duty or 100% for 20seconds into minimum 21 Ohm external resistor - See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and one programmable in/out).
Input Current - 66A at high overload or 84A when Fan/Pump rating set.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 80A at high overload or 100A when Fan/Pump rating set - to suit input bridge at 15000A²s.
Switching frequency is 3kHz (default).
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 70mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 860W at high overload or 1030W when Fan/Pump rating set.
Mounting with M6 screw fixing on 150mm x 440mm centres.
New part number is 650V-432590D0-B01P00-A3. Legacy part number is - 650VD-0300-400-0011-UK-0-0-B0-0-0 - Exactly the same as SSD Drives and Eurotherm Drives - 650VD-0300-400-0010-UK-0-0-B0-0-0. Use this for the same application as 650V-432590D0-001P00-A3 (650VD-0300-400-0011-UK-0-0-00-0-0).