Parker AC10 series AC Inverter for 4kW (5HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 9A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor.
Dimensions: Size 3 138mm Wide x 152mm Deep x 235mm High (excluding 15mm earth clamp).
Enclosure rating: IP20.
Weight: 2.96kg.
Overload: 150% x 60 seconds
Speed Control Range: 0.5-590Hz
Braking: 100% Duty to Minimum 100 Ohm, Maximum 120 Ohm external resistor (not supplied) - See the Linked products below or use the 'Which Resistor' button on this page.
Features: Integrated Keypad, 2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 1 Digital Output, 1 Relay Contact set, Terminals for Modbus RS485 Communications.
RJ11 port for commissioning using free DSELite PC software (download via link below). Parameter clone port.
Note: For 22kW and below, build standards earlier than 1.02 have 5 Digital Inputs, 1 Analogue Output and RS485 terminals on the front instead of on the side of the unit.
Input Current: 11A
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial).
Mounting: Cubicle mount via holes at rear for M5 screws on 126mm x 225mm centres.
Ambient: Rated 40°C.
Ventilation space in front: [not specified], above and below: 150mm, at sides: 50mm.
Heat Loss: [not specified]
Part number: 10G-43-0090-BF.
Download the Parker SSD AC10 Manual and Quick Start Guide from the links below:-