Parker SSD Drives AC10 Series AC Inverter for 3.7kW (4.5HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 8A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor. Rated to IP66 for use in dusty indoor environments.
Size 1: 200mm Wide x 198mm Deep x 412mm High. IP66.
Overload: 150% x 60 seconds
Speed Control Range: 0.5-590Hz
Braking: Minimum 150 Ohm external resistor (not supplied) - use the 'Which Resistor' button on this page.
Integrated Keypad, 2 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 1 Digital Output, 2 Relay Contact sets, Terminals for Modbus RS485 Communications.
Input Current: 11.6A
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz
EMC Filters: IEC EN 61800-3 (2004)(+A1:2012) Category C3 (Industrial).
Wall mount.
Rated 40°C Ambient.
Heat Loss at max output: [not specified]
Mounting via holes at rear for M5 screws on 171mm x 398mm centres.
Manufacturer part number is 16G-41-0080-BF.
Download the Parker AC10 IP66 Manual from the link below:-