SSD AC30P AC Frequency Inverter for 22kW (30HP) 400V 3 Ph motor to 45A at high overload or 30kW (40HP) to 60A when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
Size G - 220mm Wide x 287mm Deep x 480mm High overall.
Weight: 22.5kg
Overload - 150% x 60 seconds and 180% for 3.0seconds.
Speed Control Range - 0/500Hz (default), 0/1000Hz or 0/1500Hz
Switching Frequency 4 to 12kHz.(Derating may apply)
Braking (DBr) - Maximum of 20 seconds at maximum current @ a duty or 30% into minimum 17.7 Ohm external resistor - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Brake Switch Peak Current 43A (@30% Duty) Continuous current 29A@22/30Kw
Graphical Keypad (HMI)
2 x Analogue Inputs, 3 Digital Inputs,4 Programmable Digital I/O, 2 Analogue outputs, 2 Digital outputs (relay contacts). 2 EtherNet Ports.
EtherNetIp or ProfiNet available with firmware upgrade.
Cable Bracket Part Number Frame G – LA501935U004 (Not Ftted can be selected below)
Input Current - 41.8A at high overload or 54.7A when Fan/Pump rating set.
Input Voltage - 380/480V three phase +-10% at 50/60Hz.
Input fuse - 80A when Fan/Pump rating set
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Can be disconnected if required.
Standard 3C3 coated Pcb's
Safety Features: STO & Safe Stop (SS1)
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient
Ventilation space Front - 10mm
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - Not Specified
Mounting - M5 screw fixings on 220mm x 650mm centres.
Manufacturer Part Number is 31P-4G0060-BE-2S-0000.
The AC30 Technical Product Manual and Software Manuals can be downloaded from the link below:-