Parker AC30P AC Frequency Inverter for 45kW (60HP) 400V 3 Ph motor to 87A at high overload or 55kW (75HP) to 105A when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
Size H - 260mm Wide x 316mm Deep x 670mm High overall.
Weight: 45.5kg
Overload - 150% x 60 seconds and 180% for 3.0seconds.
Speed Control Range - 0/500Hz (default), 0/1000Hz or 0/1500Hz
Switching Frequency 4 to 12kHz.(Derating may apply)
Braking (DBr) - Maximum of 20 seconds at maximum current @ a duty or 30% into minimum 8.7 Ohm external resistor - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Brake Switch Peak Current 88A (@30% Duty) Continuous current 59A at 45kW
Fitted with Graphical Keypad (HMI).
2 x Analogue Inputs, 3 Digital Inputs,4 Programmable Digital I/O, 2 Analogue outputs, 2 Digital outputs (relay contacts). 2 EtherNet Ports.
EtherNetIP or ProfiNetIP available with firmware download.
Input Current - 79.5A at high overload or 95.8A when Fan/Pump rating set.
Input Voltage - 380/480V three phase +-10% at 50/60Hz.
Input fuse - 150A when Fan/Pump rating set
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Can be disconnected if required.
Standard 3C3 coated Pcb's
Saftey Features: STO & Safe Stop (SS1)
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient
Ventilation space Front - 10mm
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm.
Estimated Heat Loss at max output -Not Specified (Estimated Effeciency 98%)
Mounting - M6 screw fixings on 220mm x 650mm centres.
Manufacturer Part Number is 31P-4H0105-BE-2S-0000.
The AC30 Technical Product Manual and Software Manuals can be downloaded from the link below:-