Parker AC30V AC Frequency Inverter for 132kW (200HP) 400V 3 Ph motor to 260A at high overload or 160kW (250HP) to 315A when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
Size K - HxWxD (mm) = 1310x400x459.8.
Weight: 125kg
Overload - 150% x 60 seconds and 180% for 3.0seconds.
Speed Control Range - limited to 0 - 590Hz.Possible to go up to 1000 Hz with a software unlock.
Switching Frequency 4 to 12kHz.(Derating may apply)
Braking (DBr) - Continuous Operation Brake Seitch Current = 173A, 132kW/ 200HP. Min brake resistance = 4.4 ohms.
Fitted with Graphical Keypad (HMI).
2 x Analogue Inputs, 3 Digital Inputs,4 Programmable Digital I/O, 2 Analogue outputs, 2 Digital outputs (relay contacts).
Input Current - 229A at high overload or 276A when Fan/Pump rating set.
Input Voltage - 380/480V three phase +-10% at 50/60Hz.
Input fuse - 400A when Fan/Pump rating set
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Can be disconnected if required.
Standard 3C3 coated Pcb's
Saftey Features: STO & Safe Stop (SS1)
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient
Ventilation space Front - 20mm
Ventilation space above and below - 200mm.
Ventilation space at sides - 75mm.
Estimated Heat Loss at max output -Not Specified (Estimated Effeciency 98%)
Mounting - M10 screw fixings on 1282mm x 280mm centres.
Manufacturer Part Number is 31V-4K0315-BE-2S-0000.
The AC30 Installation and Software Manuals can be downloaded from the link below:-