Parker AC30V AC Frequency Inverter for 400kW 400V 3 Ph motor to 700A at high overload or 400kW to 790A when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
Size N - HxWxD (mm) = 1593x604x451.8.
Weight: 239kg
Overload - 150% x 60 seconds and 180% for 3.0seconds.
Speed Control Range - limited to 0 - 590Hz.Possible to go up to 1000 Hz with a software unlock.
Switching Frequency 4 to 12kHz.(Derating may apply)
No internal brake switch. An external brake chopper must be fitted if dynamic braking is required.
Fitted with Graphical Keypad (HMI).
2 x Analogue Inputs, 3 Digital Inputs,4 Programmable Digital I/O, 2 Analogue outputs, 2 Digital outputs (relay contacts).
Input Current - 680A at high overload or 762A when Fan/Pump rating set.
Input Voltage - 380/480V three phase +-10% at 50/60Hz.
Input fuse - 1250A.
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Can be disconnected if required.
Standard 3C3 coated Pcb's
Saftey Features: STO & Safe Stop (SS1)
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient
Ventilation space Front - 10mm
Ventilation space above and below - 200mm.
Ventilation space at sides - 100mm.
Estimated Heat Loss at max output -Not Specified (Estimated Effeciency 98%)
Mounting - M10 screw fixings on 1563mm x 545mm centres.
Manufacturer Part Number is 31V-4N0790-NE-2S-0000.
The AC30 Installation and Software Manuals can be downloaded from the link below:-