Parker SSD 690PB IP20 2.2kW 400V AC Inverter Drive, DBr, Unfiltered

SSD 690+ AC Frequency Inverter 2.2kW (3HP) to 5.5A for 400V 3 Ph motors in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
Size B - 177mm Wide x 181mm Deep x 233mm High.

6901 Keypad fitted.

Overload - 150% x 60 seconds.
Speed Control Range - 0/120Hz (default), 0/240Hz or 0/480Hz.
Braking - 100% duty into minimum 100 Ohm external resistor.

4 x Analogue Inputs, 8 Digital Inputs, 3 Analogue outputs, 3 Digital outputs (relay contacts).
Input Current - 8A.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 10A to suit input bridge at 340A²s
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 80mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 130W.
Mounting - M4 screw fixings on 129.5mm x 223mm centres.

Manufacturer part number is 690-431550B0-B00P00-A000. Legacy Part Number was 690PB/0022/400/3/0/0011/UK/0/0/0/0/0 - Exactly the same as SSD Drives and Eurotherm Drives branded product bearing the same Legacy Part Number.