SSD 690+ AC Frequency Inverter for 11kW (15HP) to 21A at high overload or 15kW (20HP) to 27A 400V 3 Ph motor when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
Size C - 201mm Wide x 208mm Deep x 348mm High.
Weight is 9.3kg (11.3kg packed)
Tarrif code is 85371091
Overload - 150% x 60 seconds and 180% for 0.5seconds.
Speed Control Range - 0/120Hz (default), 0/240Hz or 0/480Hz.
Braking (DBr) - 100% x 20 seconds or 35% continuous into minimum 50 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
4 x Analogue Inputs, 8 Digital Inputs, 3 Analogue outputs, 3 Digital outputs (relay contacts).
Input Current - 26A at high overload or 30A when Fan/Pump rating set.
Input Voltage - 380-500V three phase +-10% at 50/60Hz.
Input fuse - 32A
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial).
Ventilation space above and below - 70mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 470W at high overload or 605W when Fan/Pump rating set.
Mounting - M6 screw fixings on 150mm x 335mm centres.
Full part number is 690-532210C0-B00P00-A400. Was 690PC-0110-500-0010-UK-0-0-0-0-B0-0-0 and is exactly the same as SSD Drives and Eurotherm Drives part of the same number.
Download the 690P Technical, Application and Software Manuals from the links below:-