Parker SSD Drives 650G Series AC Inverter for 5.5kW (7.5HP) 400V three phase motor in VxF and Sensorless Vector control to 12A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size 3: 96mm Wide x 200mm Deep x 260mm High. IP20.
Weight: 2.7kg.
Overload: 150% x 30 seconds
Speed Control Range: 0-240Hz
Braking: 100% part time or 50% duty to minimum 56 Ohm, maximum 100 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Removable Keypad, RS232 Port, 2 Analogue Inputs, 3/4 Digital Inputs, 1 Analogue Output, 10 Volt ref, 2 Programmable Digital Input/Outputs, 1 Relay Contact set, 1 motor thermistor input.
Input Current: 18A
Input Voltage: 380-460V Three Phase ±10% at 50-60Hz ±10%
EMC Compliance: No integrated EMC filters.
Cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [unspecified], above and below: 100mm, at sides: [unspecified].
Heat Loss at max output: 136W
Mounting via 35mm DIN rail or via 2 x M5 screws at rear on 242mm centres.
Manufacturer part number is 650G-43212030-B01P00-A1.
Download the Parker SSD 650G Manual, Quick Start Guide and Software Manual from the links below:-