SSD 690+ AC Frequency Inverter for 22kW (30HP) 400V 3 Ph motor to 45A at high overload or 30kW (40HP) to 59A when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
This is now made up of three parts. That are the 690P with Braking (has no effect if there is no external resistor), HTTL Encoder Board and Profibus communications card included. The linked products below are included in this item. The 690P without braking is no longer available from the Manufacturer.
Size D - 252mm Wide x 245mm Deep x 471mm High overall.
Overload - 150% x 60 seconds and 180% for 0.5seconds.
Speed Control Range - 0/120Hz (default), 0/240Hz or 0/480Hz.
Braking - Present but not used.
4 x Analogue Inputs, 8 Digital Inputs, 3 Analogue outputs, 3 Digital outputs (relay contacts).
Input Current - 47.2A at high overload or 59A when Fan/Pump rating set.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 50A at high overload or 63A when Fan/Pump rating set - to suit input bridge at 6000A²s
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 70mm.
Ventilation space at sides - 25mm.
Heat Loss at max output - 730W at high overload or 860W when Fan/Pump rating set.
Mounting - M6 screw fixings on 150mm x 440mm centres.
Full part number is - 690-432450D0-000P00-A43P (Was 690PD/0220/400/0011/UK/0/0/HTTL/Prof/0/0/0)
The menu uses simple to understand English-language terms to describe its selection and functions. The default is English, but can be changed to German, French, Spanish, Italian, Polish, Swedish and Portuguese, by going to 'System', then 'Languages' and selecting the language required.