SSD 650 AC Frequency Inverter for 4.0kW (5.4HP) 400V 3 Ph motor in VxF control to 9A. Simple set-up and ready to run from its default settings.
96mm Wide x 195mm Deep x 257mm High.
From September 2015 the Parker SSD 650 Series is no longer available. The manufacturer recommends that customers migrate to an AC10 of equivalent rating. If an AC10 is not suitable, a 650G can be used as a direct replacement. See linked products below for both options.
Overload - 150% x 30seconds.
Speed Control Range - 0/240Hz.
Braking - 40% duty into minimum 100 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 x Analogue Inputs, 3/4 Digital Inputs, 1 Analogue output, 1/2 Digital outputs (one relay and one programmable in/out).
Input Current - 13.9A.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
EMC Filter NOT included.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 100W.
Mounting onto symmetrical DIN rail or use the detachable clip for screw fixing.
Full part number is - 650-43190030-B00P00-A1 - Exactly the same as SSD Drives, Eurotherm Drives and RS - 650-040-400-0-00-DISP-UK-0-0.
Download the 650 Technical Product Manual from the links below...