SSD 650V AC Frequency Inverter for 75 kW (100HP) 400V 3 Ph motor to 145A at high overload or 90 kW (125HP) to 165A when Fan/Pump rated, operates in VxF or Sensorless Flux Vector. Simple set-up and ready to run in VxF from its default settings.
Size F - 257mm Wide x 355mm Deep x 720mm High overall.
Includes 6521 Operator Station (keypad).
Overload - up to 150% x 60 seconds and 180% for 0.5seconds (at high overload rating).
Speed Control Range - 0/240Hz
Braking - None.
Includes RS485 Comms Module (Modbus RTU, EI Bysync F1/3)
2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and one programmable in/out).
Input Current - 143A at high overload or 164A when Fan/Pump rating set.
Input Voltage - 380 to 460V (±10%) 50/60Hz.
Input fuse - 160A at high overload and 200A when Fan/Pump rating set - to suit input bridge at 100,000A²s
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation fan is 140W requiring a Single Phase 230V supply fused at 3A.
Ventilation space above and below - 70mm.
Ventilation space at sides - 0mm.
Ventilation space in front - 25mm.
Heat Loss at max output - 1670W at high overload or 1950W when Fan/Pump rating set.
Mounting - M6 screw fixings on 150mm x 700mm centres.
Full part number is 650V−433180F2−002P00−A3. Was 650VF-0750-400-0011-UK-0-RS485-00-230-0.
Exactly the same as SSD Drives and Eurotherm Drives 650VF-0750-400-0011-UK-0-RS485-00-230-0.
ownload the 650V Manual from the link below...