SSD 650V AC Frequency Inverter for 11kW (15HP) 400V 3 Ph motor to 23A at high overload, or 15kW (20HP) to 31A when Fan/Pump rated - operates in VxF or Sensorless Flux Vector control. Simple set-up and ready to run in VxF from its default settings.
Size 'C' - 201mm Wide x 208mm Deep x 348mm High.
No Keypad included.
From September 2015 the Parker SSD 650 Series is no longer available. The manufacturer recommends that customers migrate to an AC10 of equivalent rating. If an AC10 is not suitable, a 650G can be used as a direct replacement. See linked products below for both options.
Overload - 150% x 30seconds and 180% for 0.5seconds.
Speed Control Range - 0/240Hz.
Braking - 35% duty or 100% for 20seconds into minimum 50 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and two programmable in/out).
Input Current - 26.1A at high overload or 33.6A when Fan/Pump rating set.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 32A at high overload or 40A when Fan/Pump rating set - to suit input bridge at 4000A²s.
EMC Filters included to EN61800 for 2nd environment (Industrial).
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 70mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 330W at high overload or 500W when Fan/Pump rating set.
Mounting with M6 screw fixing on 150mm x 335mm centres.
Full part number is - 650V-432230C0-B01P00-A0 - Was 650VC-0110-400-0010-UK-0-0-B0-0-0 - Exactly the same as SSD Drives and Eurotherm Drives - 650VC-0110-400-0010-UK-0-0-B0-0-0.
Add the falling dirt protection cover below, if you have -0021- or -0020- in the product code.