SSD 650V AC Frequency Inverter for 18.5kW (25HP) 400V 3 Ph motor to 38A at high overload or 22kW (30HP) to 45A when Fan/Pump rated, operates in VxF or Sensorless Flux Vector control. Simple set-up and ready to run in VxF from its default settings.
Size D - 252mm Wide x 245mm Deep x 453mm High.
Overload - 150% x 30seconds and 180% for 0.5seconds.
Speed Control Range - 0/240Hz.
Braking - None.
2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and two programmable in/out).
Input Current - 40.5A at high overload or 47.2A when Fan/Pump rating set.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 50A at high overload and when Fan/Pump rating set - to suit input bridge at 6000A²s
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 70mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 605W at high overload or 730W when Fan/Pump rating set.
Mounting with M6 Screws on 150mm x 440mm fixing.
Full part number is - 650V-432380D0-001P00-A3. Was - 650VD-0180-400-0011-UK-0-0-00-0-0 - Exactly the same as SSD Drives and Eurotherm Drives 650VD-0180-400-0011-UK-0-0-0-0-0.
Dowload the 650V Manual from the link below...