Parker SSD 650VE 37kW/45kW 400V - AC Inverter Drive Speed Controller

SSD 650V AC Frequency Inverter for 37W (50HP) 400V 3 Ph motor to 73A at high overload or 45kW (60HP) to 87A when Fan/Pump rated, operates in VxF or Sensorless Flux Vector control. Simple set-up and ready to run in VxF from its default settings.
Size E - 257mm Wide x 312mm Deep x 669mm High.

Overload - 150% x 30seconds and 180% for 0.5seconds.
Speed Control Range - 0/240Hz.
Braking - 30% continuous or 100% for 20seconds into minimum 15 Ohm external resistor.  See the Resistor options linked below or use the 'Which Resistor' button on this page.

2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and one programmable in/out).
Input Current - 81A at high overload or 95A when Fan/Pump rating set.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 100A at high overload and when Fan/Pump rating set - to suit input bridge at 18000A²s.

Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 70mm.
Ventilation space at sides - 25mm.
Heat Loss at max output - 850W at high overload or 1029W when Fan/Pump rating set.
Mounting with M6 screw fixing on 150mm x 630mm centres.

Full part number is - 650V-432730E0-B01P00-A3. Was 650VE-0370-400-0011-UK-0-0-B0-0-0 - Exactly the same as SSD Drives and Eurotherm Drives - 650VE-0370-400-0010-UK-0-0-B0-0-0.