SSD 650V AC Frequency Inverter for 55 kW (75HP) 400V 3 Ph motor to 105A at high overload or 75 kW (100HP) to 145A when Fan/Pump rated, operates in VxF or Sensorless Flux Vector. Simple set-up and ready to run in VxF from its default settings.
Size F - 257mm Wide x 355mm Deep x 720mm High overall.
Overload - up to 150% x 60 seconds and 180% for 0.5seconds (at high overload rating).
Speed Control Range - 0/240Hz
Braking - none.
Includes RS485 Comms Module (Modbus RTU, EI Bysync F1/3)
2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and one programmable in/out).
Input Current - 114A at high overload or 143A when Fan/Pump rating set.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 125A at high overload and 160A when Fan/Pump rating set - to suit input bridge at 100000A²s
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation fan is 130W requiring a 110V supply fused at 3A.
Ventilation space above and below - 70mm - Ventilation space at sides - 25mm.
Heat Loss at max output - 1220W at high overload or 1670W when Fan/Pump rating set.
Mounting - M6 screw fixings on 150mm x 700mm centres.
Full part number is 650V-433105F1-002P00-A3. Was 650VF/0550/400/0011/UK/0/RS485/0/115/0 r 650VF-0550-400-0011-UK-0-RS485-0-115-0. - Exactly the same as SSD Drives and Eurotherm Drives - 650VF-0550-400-0011-UK-0-RS485-0-115-0.
Replaces:- 584SV/0550/400/0011/UK/000/0000/00/000/000,