SSD 690P AC Frequency Inverter for a 280kW (375HP) 400V 3 Ph motor to 520A at high overload (heavy Duty), or 315kW (420HP) to 590A when Fan/Pump rated. Operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple to set-up and ready to run in VxF from its default settings.
Requires external choke, part number CO389936U403 (not included), see the products linked below.
Dimensions: Size H 570mm Wide x 465mm Deep x 1180mm High, plus space at sides for bars and above for fan duct and roof mounting fan.
Enclosure Rating: IP00.
Weight: 125kg.
Overload: 150% x 60 seconds and 180% for 0.5seconds at high overload rating, or 110% for 10 seconds for fan/pump rating.
Switching frequency: 2.5kHz at full output, reducing to 1.2kHz at maximum overload.
Speed Control Range: 0/250Hz at continuous rating, or 0/120Hz if used to maximum overload.
Braking: 100% x 20 seconds duty or 30% continuous into minimum 1.34 Ohm external resistor, see the Resistor options linked below, or use the 'Which Resistor' button on this page.
Features: 4 x Analogue Inputs, 8 Digital Inputs, 3 Analogue outputs, 3 Digital outputs (relay contacts).
Input Current: 516A at high overload or 571A when Fan/Pump rating set.
Input Voltage: 380V/460V three phase +-10% at 50/60Hz.
Input Fuse: 600A at high overload and 650A when Fan/Pump rating set to suit input bridge at 813000A²s
Mounting: Cubicle mounting.
Ambient Temperature: Rated at 40C.
Ventilation Fan: Requires a separate 110V supply fused at 8A.
Heat Loss: 5469W at maximum output when high overload rated, or 6200W for Fan/Pump rating.
Part Number: 690-433520H1-B00P00-A400. Legacy Part number: 690PH/2800/400/0011/UK/0/0/0/0/B0/115/0. Exactly the same as SSD Drives and Eurotherm Drives product bearing the same Legacy Part Number in all but colour.
The menu uses simple to understand English-language terms to describe its selection and functions. The default is English, but can be changed to German, French, Spanish, Italian, Polish, Swedish and Portuguese, by going to 'System', then 'Languages' and selecting the language required.
Download the 690P Manual from the links below:-