SSD 690+ AC Frequency Inverter for 30kW (40HP) 400V 3 Ph motor to 59A at high overload or 37kW (50HP) to 73A when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
Size D - 252mm Wide x 245mm Deep x 471mm High overall.
Overload - 150% x 60 seconds and 180% for 0.5seconds.
Switching frequency - 3kHz.
Speed Control Range - 0/300Hz maximum.
4 x Analogue Inputs, 8 Digital Inputs, 3 Analogue outputs, 3 Digital outputs (relay contacts).
Input Current - 66A at high overload or 84A when Fan/Pump rating set.
Input Voltage - 400V three phase +-10% at 60Hz.
Input fuse - 80A at high overload or 100A when Fan/Pump rating set - to suit input bridge at 15000A²s
IP2X plus IP40 top cover for wall mounting in a clean environment. Fitted with cable gland plate
Rated at 40C Ambient.
Ventilation space above and below - 70mm. Ventilation space at sides - 15mm LHS and 5mm RHS.
Heat Loss at max output - 860W at high overload or 1030W when Fan/Pump rating set.
Mounting - M6 screw fixings on 150mm x 440mm centres.
Full part number is - 690-432590D0-000W00-B400
Legacy part number is - 690PD-0300-400-0021-US-0-0-0-0-0-0-0. - Exactly the same as SSD Drives and Eurotherm Drives - 690PD-0300-400-0021-US-0-0-0-0-0-0-0.
The menu uses simple to understand English-language terms to describe its selection and functions. The default is English.