Parker 710 Power Module for 380-480Vac 3 phase supply. Heavy Duty rating is 4kW (5HP) 10A 5.5kW (7.5HP) to 12A when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted).
POWER MODULE ONLY: Use a compatible AC30 control module for STO function.
Size D - 100mm Wide x 255mm Deep x 286mm High overall. IP20
Weight: 4.5kg
Overload - 150% x 60 seconds and 180% for 3.0seconds.
Speed Control Range - 0/500Hz (default), 0/1000Hz or 0/1500Hz
Switching Frequency 4 to 16kHz.(Derating may apply)
Braking (DBr) - Maximum of 20 seconds at maximum current @ a duty 30% into minimum 98 Ohm external resistor - See the Resistor options linked below or use the 'Which Resistor' button on this page
Brake Switch Peak Current 7.8A (@30% Duty) Continuous current 5.2A@4kW
No keypad
Input Current – 8A at high overload or 10.6A when Fan/Pump rating set.
Input Voltage - 380/480V three phase +-10% at 50/60Hz.
Input fuse - 16A when Fan/Pump rating set
Filters: EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Can be disconnected if required.
Standard 3C3 coated PCBs
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient
Ventilation space Front - 10mm
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - Not Specified (estimated efficiency 97%)
Mounting – M4 screw fixings on 80mm x 270mm centres.
Manufacturer Part Number is 710-4D0012-BE-0S-0000.
The AC30V Technical Manual can be downloaded from the link below:-