Parker AC10 series USB Programming Adapter Kit and Clone Module for use with IP20 AC10 Series Inverters up to 22kW.
Connects the Inverter to a PC via USB for use with the free to download 'DSELite' commissioning software, or to copy parameters from one drive to another. Also powers the drive electronics from the USB, to allow the AC10 to be programmed off-line.
Comprises:-
Non-Isolated USB Adaptor and Clone Module.
2 x 4 Terminal Cable Adaptor to cable socket.
1m Cable programming cable.
Mini CD containing the Drivers, Installation Guides, Software and User Manual.
As a Clone Module:
Plug the module directly into the side of the AC10 Inverter Drive.
For Older AC10 types, the kit allows the clone module to be wired into the RS485 terminals of the drive.
As a USB Adaptor for PC to Drive Connection:
Remove the cover from the USB plug, then plug the Clone Module directly into the pc.
Remove the plug-in terminals from one of the 4 terminal cable adaptors and plug the adaptor onto the Clone module.
Plug the cable into the adaptor and the 4 pin plug adaptor.
Plug the 4 pin plug into the socket in the side of the AC10.
For Older AC10 types, connect the remaining 4 terminal cable adaptor and wire the connections to the drive RS485 connections.
Part number: 1002-00-00.
Download Parker DSELite from the link below:-