Parker SSD 514C 32A 4Q 110V/230V/400V 1ph/2ph AC to DC Isolated Signal

514C-32-00-00-00 (514C/32/00/00/00)

Order Code: 20537
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: Parker, Range: DC514C

Parker SSD Drives 514C 32A Four Quadrant DC Thyristor Drive for 400V, 230V or 110V single/two phase Supply.
Typical Motor Output from 400V AC supply: 8.2kW (11HP) at 320V DC for motor speed and torque control.
Typical Motor Output from 230V AC supply: 4.6kW (6.2HP) at 180V DC.
Typical Motor Output from 110V AC supply: 2.3kW (3.1HP) at 90V DC.
Simple to set-up in analogue, fully-isolated form and ready to run from its default settings.
Dimensions: 160mm Wide x 130mm Deep x 240mm High - Panel mount with screw fixings on 253 x 120mm centres.

Terminals include:-
2 x Analogue Setpoint Inputs.
Current Limit analogue Input.
Tacho input (or internal AVF) Feedback.
4 x Analogue Outputs for Ramp, Total Setpoint, Actual Speed and Current meter.
2 x Digital outputs for Health and Zero Speed (selectable to Zero Setpoint).
+ & - 10V for Potentiometers.
Separate AC input to Field Bridge (allows flexibility for the Motor field Voltage).

Input Current: 48A.
Input Voltage: 110V/120V, 220V/240V, 380V/415V or 460V/480V single phase/two phase +-10% at 50/60Hz.

Ambient Temperature: Rated at 40C.
Ventilation space above and below: 75mm, Ventilation space at sides: 0mm.
Heat Loss: 75W at maximum output.

Part Number: 514C-32-00-00-00, Exactly the same as SSD Drives, Rapier Drives, Eurotherm Drives equavalent and RS - 514C-32-01-00-00. Sometimes specified as 514C32000000.

Replaces SSD, Eurotherm, Rapier Drives and RS 540