Parker SSD Drives 590PX Series - 70A Four Quadrant DC Thyristor Drive for 400V Supply with 110V or 230V Control supply.
Typical Motor output - up to 30 (40) at 460V DC for fully regenerative DC motor speed and torque control.
Integrated keypad and display included.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Size 1 - 200mm Wide x 220mm Deep x 375mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current - 57.4A for Armature + up to 20A for Field.
Input Voltage - 220V to 500V +-10% at 50/60Hz (for use on 220V/230V/240V/380V/415V/440V/460V/480V three phase main supplies).
Input fuse - 80A - to suit input bridge at 8000A²s
Use a choke in the supply at 50uH minimum.
Rated at 40C Ambient.
Ventilation space above - 100mm.
Ventilation space below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 215W.
Panel mount with M6 screw fixings on 360 x 140mm centres.
Full part number is 590PX-53270010-P00-U4V0. Was 590PX/0070/500/0011/UK/AVF/0/0/00, exactly the same as Eurotherm Drives 590PX-0070-500-0011-UK-AN/0/0/00
Uses 590PX door fitted to a 590C stack assembly
Download the 590C technical product manual from the link below...