SSD Drives 591P Series - 830A Single or Two Quadrant DC Thyristor Drive for 500-600V Supply with 230V Control supply, wire-ended Encoder feedback and Profibus DP Comms.
Typical Motor output - up to 500kW (670HP) at 660V DC for DC motor speed and torque control.
Size 4: 253mm Wide x 358mm Deep x 700mm High. IP20.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Wire-ended Encoder (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Profibus DP
Input Current - 747A for Armature + up to 30A for Field.
Input Voltage - 500-600V three phase +-10% at 50-60Hz +- 5%.
Control supply at 230V single phase is required for; electronics, pilot for main contactor and 140W cooling fan.
Rated at 40C Ambient.
Ventilation space above - 200mm.
Ventilation space below - 210mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 2580W.
Panel mount with M8 screw fixings on 680 x 150mm centres.
Full part number is 591P-63383042-P00-U4WP. Was 591P-0830-600-0011-UK-ENW-PROF-230-0, Exactly the same as Eurotherm Drives 591P-0830-600-0011-UK-ENW-PROF-230-0.
Download the 590P full Manual from the link below:-