SSD Drives 590P Series 70A Single or Two Quadrant DC Thyristor Drive for 400V Supply with 110V or 230V Control supply (universal). Converts three phase AC to DC for speed and torque control of a DC motor.
Typical Motor output: up to 28.5kW (38HP) at 460V DC for motor speed and torque control.
Keypad included. No options are included.
Simple to set-up in Digital, fully-isolated Single or Two Quadrant form and ready to run from its 'Quick Set-Up' settings.
Dimensions: Frame 2, 200mm Wide x 292mm Deep x 434mm High.
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Internal AVF Feedback.
10 x Digital inputs, 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current: 58A for Armature + up to 10A for the Field.
Input Voltage: 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Input fuse: 80A to suit input bridge at 8000A²s, see the items linked below.
Use a choke in the supply at 50uH minimum, see the items linked below.
Ambient Temperature: Rated at 40C.
Ventilation space above: 160mm.
Ventilation space below: 100mm.
Ventilation space at sides: 0mm.
Heat Loss: 234W at maximum output: .
Mounting: Panel mount with M6 screw fixings on 418 x 140mm centres.
Part number: 591P-53270020-P00-U4V0. Legacy Part Number: 591P-0070-500-0011-UK-ARM-0-0-0, exactly the same as Eurotherm Drives 591P-0070-500-0011-UK-ARM-0-0-0.
Replaces:- SSD and Eurotherm Drives 591A-0070, 546-0700 analogue products. Fitted to many Extruder and general applications. Requires external back-up high speed fuses.
Download the 591P Technical product Manual from the link below...