Parker SSD Drives 591P Series 35A Single or Two Quadrant DC Thyristor Drive for 400V Supply with 110V or 230V Control supply. Converts three phase AC to DC for speed and torque control of a DC motor.
Typical Motor output: up to 15kW (20HP) at 460V DC for DC motor speed and torque control.
Keypad and analogue Tachogenerator feedback board are included.
Simple to set-up in Digital, fully-isolated Single or Two Quadrant form.
Dimensions: Size 1 200mm Wide x 220mm Deep x 375mm High.
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current: 28.7A for Armature + up to 4A for Field.
Input Voltage: 220V to 500V +-10% at 50/60Hz (for use on 220V/230V/240V/380V/415V/440V/460V/480V three phase main supplies).
Input fuse: 40A to suit input bridge at 720A²s
Use a choke in the supply at 50uH minimum.
Ambient: Rated at 40C.
Ventilation space: 100mm above, 100mm below, 0mm at the sides.
Heat Loss: 117W at max output.
Mounting: Panel mount with M6 screw fixings on 360 x 140mm centres.
Part number: 591P-53235010-P00-U4A0. Was: 591P-0035-500-0011-UK-AN-0-0-0, exactly the same as Eurotherm Drives 591P-0035-500-0011-UK-AN-0-0-0. Use this product for code 591P-53235010-P00-U4V0 (591P-0035-500-0011-UK-AVF-0-0-0,) and change the feedback option to 'AVF' for Armature Voltage Feedback as speed measurement.
Replaces:- SSD and Eurotherm Drives 590C-0035 digital, 590A-0035 and 545-0350 analogue products. Requires external back-up high speed fuses.
Download the 590P technical product manual from the link below...