SSD Drives 590P Series - 180A Four Quadrant DC Thyristor Drive for 400V Supply with 230V Control supply.
Typical Motor output - up to 75kW (100HP) at 460V DC for fully regenerative DC motor speed and torque control.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
250mm Wide x 180mm Deep x 485mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Internal AVF Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current - 148A for Armature + up to 10A for Field.
Input Voltage - 380V/415V/440V/460V three phase +-10% at 50/60Hz via 200A High Speed back-up fuses.
Rated at 40C Ambient.
Ventilation space above - 150mm.
Ventilation space below - 100mm.
Ventilation space at sides - 0mm (bars are left side).
Heat Loss at max output - 570W.
Panel mount with M6 screw fixings on 400 x 200mm centres.
Full part number is 590P-53318032-P00-U4V0. Was 590P-0180-500-0011-UK-ARM-0-230-0.
Exactly the same as SSD Drives and Eurotherm Drives 590P-0180-500-0011-UK-ARM-0-230-0, 590P/0180/500/0011/UK/ARM/0/230/0
Replaces:-
SSD and Eurotherm Drives 590C/0180 digital, 590A/0180 and 545/1800 analogue products. Requires external back-up high speed fuses.
View alternatives - search for 180A DC.
Download the 590P Technical Product Manual from the Link below...