SSD Drives 590P Series - 1950A Four Quadrant DC Thyristor Drive for 220-500V 3ph Supply with universal 115V - 230V 1ph control circuit.
Typical Motor output - up to 800kW (1100HP) at 500V DC, for fully regenerative DC motor speed and torque control.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Size 6: 686mm Wide x 497mm Deep x 715mm High.
Weight is 111kg (can be assembled on site from a case and 3off phase assemblies each not heavier than 33kg)
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current - 1600A for Armature + up to 60A for Field.
Fault level is 100kA
Input Voltage - 220-500V ac ±10%, 50/60Hz ± 5%.
Control supply at 115V or 230V single phase is required for; electronics, pilot for main contactor and 300W cooling fan. Fan flc is 3A at 115V and 1.5A at 230V
Rated at 40C Ambient.
Heat Loss at max output - 6000W.
Full part number is - 590P-53419560-P00-U4A0. (Legacy part number 590P/1950/500/0011/UK/AN/0/0/0)
Includes 3 x 1250A high speed limb internal (arm) fuses.
(Thyristor I*t = n/a)
View alternatives - search for 1950A DC.
Download the 590P full Manual from the link below...