Parker SSD Drives 590P Series 500A Four Quadrant DC Thyristor Drive for 400V Supply, Armature Voltage feedback with 230V Control supply and including the Vent fan kit (Airflow kit).
Typical Motor output: up to 210kW (275HP) at 460V DC for fully regenerative DC motor speed and torque control.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Dimensions: Frame 4 253mm Wide x 358mm Deep x 700mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
No Tacho input (uses internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Rated Current: 500A.
Overload: 200% x 10 seconds and 150% x 30 seconds.
Input Current: 410A for Armature + up to 30A for Field.
Input Voltage: 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Control supply: 230V single phase required for; electronics, pilot for main contactor and 140W cooling fan.
Ambient: Rated to 40C.
Ventilation space above: 200mm.
Ventilation space below: 210mm.
Ventilation space at sides: 0mm.
Heat Loss at max output: 1590W.
Mounting: Panel mount with M8 screw fixings on 680 x 150mm centres.
Part number: 590P-53350042-A00-U4V0. Previous Part Number was 590P-0500-500-0041-UK-ARM-0-230-0, Exactly the same as Eurotherm Drives 590P-0500-500-0041-UK-ARM-0-230-0.
Replaces:- SSD and Eurotherm Drives 594-4500, 590C-0720 digital, 590A-0720 and 550-720 analogue products when used with up to 500A motor armature. Requires external back-up high speed fuses.
Download the 590P and 591P Product Technical and Installation Manual from the link below...