637F AC Servo Drive controller for Torque, Speed and Position Control of a Brushless AC Servo motor to 22A
NOT AVAILABLE AFTER 30/06/2018.
Features:-
PDP communications card fitted
Ready tuned current loop from extensive motor library.
Fully Programmable move, math and sequence functions.
8 x Digital Inputs, 3 x Digital Outputs and 4 Analogue Inputs.
Additional Encoder input or output for follower, master encoder or external CNC function.
Braking to external resistor at 15 ohms minimum - See the Resistor options linked below or use the 'Which Resistor' button on this page.
22A continuous rating x 400V AC output
200% x 5 seconds to 100% RMS
Input is 400V 3 phase x 24A (maximum is 460V +-10%).
Requires 24V DC control supply at 1.5A continuous and 6A peak for 0.8ms.
IP20 enclosure rating
105mm wide x 280mm deep x 400mm high
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm.
Weighs 8.8kg
Suitable for use with Parvex NX, SSD and ASB ACMn, ACM2n, ACR and ACRL Servo Motors.
Manufacturers full part number - 637FKD6R2270485000RD2 (637F/K/D6R/22/S5/7/0/485/000/RD2)
637F is the 'Fast' design and replaces the 637 and 637+. Exactly the same as Eurotherm Drives - 637F-K-D6R-22-7 (637F/K/D6R/22/7) for standard resolver feedback.
Sold under various names including SSD Drives, Eurotherm Drives, ASB Apollo 3G, Samson 3G and Parker Hannifin.
Download the 637f Manual from the link below...